A chiropractic technician runs the therapy and rehab side of a chiropractic office under the chiropractor's delegation, a role Wisconsin trains through three 4-hour course blocks plus a competency assessment.
The job covers setting up heat, cold and electrical modalities, operating decompression and mechanical therapy equipment, coaching rehab exercises and recording vitals.
Wisconsin writes the title into statute.
Elsewhere the job travels under other names (chiropractic therapy assistant, rehab technician) that a state may define in its own rules, or sits inside a broader chiropractic assistant role.
What is a chiropractic technician (therapy tech, rehab assistant)?
A chiropractic technician is the clinic team member who runs the therapy and rehab side of a chiropractic office.
The chiropractor delegates the work: setting up heat, cold and electrical modalities, operating decompression and mechanical therapy equipment, coaching rehab exercises, and recording vitals and baseline patient data.
The chiropractor examines, diagnoses and adjusts; the technician prepares and delivers the therapies the chiropractor orders around that care.
The same job travels under several names: chiropractic technician, chiropractic tech, chiropractic therapy assistant, chiropractic rehab assistant, rehab technician.
Wisconsin gives the title legal standing: state statute names the chiropractic technician, bars staff without one of the allowed credentials from providing adjunctive services, and protects the C.T. initials (Wisconsin Statutes 446.026(1)).
Wisconsin's rules call the work "adjunctive services" (a preliminary history and physiotherapy that supports care) and expressly exclude diagnosis, analysis of tests and the adjustment itself (Chir 10.01(1)).
The role matters to the industry's shape: BLS counted 35,860 chiropractor jobs in offices of chiropractors in the May 2025 OEWS (24.33% of the industry's employment), so roughly three in four wage-and-salary jobs in chiropractic offices are held by non-chiropractors.
The same therapy work can also sit inside a broader chiropractic assistant role, which the next section untangles.
What does a chiropractic technician do on the therapy floor?
On the therapy floor, a chiropractic technician runs a repeating loop of patient prep, treatment and documentation.
Patients arrive with therapy orders from the chiropractor; the technician rooms them, records vital signs and baseline patient data, and sets up the ordered modality.
Wisconsin's training rule reads like a duty list: its course must cover a therapeutic overview, baseline patient data and vital signs, and it ends with a competency assessment (Chir 10.015).
During treatment the technician monitors the patient and the machine, keeps timing on each station, and documents what was delivered.
The modality menu Wisconsin certifies gives a feel for the equipment: thermotherapy and cryotherapy, electrotherapy, ultrasound, light therapy, surface EMG, mechanical therapy and decompression, and exercise and rehabilitation (Chir 10.02(3)(g)).
Which machines actually sit on the floor varies practice by practice, so much of the toolkit is learned on the job.
Supervision is the frame around all of it: Wisconsin requires direct, on-premises supervision by the chiropractor, who keeps ultimate responsibility for the care (Chir 10.02(4)-(5)).
The adjustment stays on the other side of the line: in the state delegation rules we reviewed, spinal adjusting remains the chiropractor's.
Massage has its own gate in Wisconsin: a chiropractor may delegate massage or bodywork therapy to a technician only if that person also holds a Wisconsin massage therapist license (Chir 10.02(2)).
Chiropractic technician vs chiropractic assistant: is there a difference?
It depends: state law decides whether a chiropractic technician differs from a chiropractic assistant.
Where a state writes rules, it writes them for its own title.
Wisconsin's statute reserves adjunctive services to certified chiropractic technicians (with medical-assistant-trained staff and health care professionals as the other allowed routes) and protects the C.T. initials (Wisconsin Statutes 446.026(1)).
Elsewhere the same words can describe a broader front-and-back-of-house job in a state where the board issues no dedicated credential.
Wisconsin also opened a second door: Chir 10.024 (created by 2023 Wisconsin Act 168) lets chiropractors delegate adjunctive services to medical-assistant-trained staff, under the same direct, on-premises supervision.
So in Wisconsin the technician is a defined, certified therapy role, and the medical-assistant route reaches the same therapy work with different training.
Where no state credential exists, the job description in the posting does the defining, inside whatever the state's delegation rules allow.
On ChiroHires, chiropractic technician is the tag for the therapy-and-rehab track: postings for chiropractic therapy assistants and rehab technicians land there too.
Neither title is a license, and neither makes the holder an independent practitioner; a state credential certifies a person for delegated services, while the license on the wall belongs to the chiropractor.
What qualifications do chiropractic techs need?
Chiropractic techs need the qualifications their state sets, so the checklist depends on where the clinic sits.
Wisconsin sets out the fullest template of the state rules this page reviewed.
Its statute reserves adjunctive services to certified technicians (with medical-assistant-trained staff and health care professionals as the other allowed routes) and protects the title (Wisconsin Statutes 446.026(1)), and the chiropractic board's course rules require three 4-hour blocks (a therapeutic overview, baseline patient data and vital signs) plus a competency assessment (Chir 10.015).
Wisconsin also sets hour minimums per modality (Chir 10.02(3)(g)).
The floor is 1 hour each for thermotherapy and cryotherapy.
Electrotherapy, ultrasound, light therapy, surface EMG, and mechanical therapy with decompression each need 3 hours.
Exercise and rehabilitation needs 24 hours.
Under a parallel rule (Chir 10.024, created by 2023 Wisconsin Act 168), chiropractors can reach the same therapy work through medical-assistant-trained staff, under direct, on-premises supervision.
Outside Wisconsin, our state-by-state research found some states that credential assistants who deliver therapies under their own titles and others with no dedicated credential, so the state chiropractic board's rules decide what training applies.
For the closest comparable occupation, BLS's Occupational Outlook Handbook says medical assistants typically need a postsecondary certificate, though some enter with a high school diploma and on-the-job training that may take several months.
The same handbook entry for physical therapist aides says they usually need a high school diploma plus about one week to one month of on-the-job training, with tasks that vary by state.
National certification exists too: the Federation of Chiropractic Licensing Boards (FCLB) offers the Certified Chiropractic Clinical Assistant (CCCA) for staff who assist with therapies, and FCLB scopes it to therapy-assist work rather than x-ray or front-office duties.
Its June 2025 listing set eligibility at 18 or older with a high school diploma or equivalent, plus either 24 hours of approved education or 2000 hours of supervised experience.
The $150 fee included the exam, a 100-item online test given in 75 minutes.
First-year certificants complete 300 hours of supervised practical experience, and the credential renews every 2 years with 6 CE hours and a $35 fee.
A certification is not a license, and none of it replaces what the state board requires.
The chiropractor's delegation rules govern what a technician may actually do.
Check the state board before you train
How much do chiropractic techs make?
Chiropractic techs have no BLS wage of their own, so the closest available pay numbers come from proxy occupations, each labeled.
BLS has no occupation code for chiropractic assistants, and the industry tables we reviewed carry no chiropractic-technician line either.
The clinic-support proxy is medical assistants working in offices of chiropractors.
In the May 2025 OEWS, BLS counted 28,340 medical assistant jobs in offices of chiropractors, with a median of $37,520 a year ($18.04 an hour).
The 10th percentile earned $30,710 and the 90th percentile $47,740.
These are wage-and-salary employees only: practice owners and other self-employed workers are not in the count.
The therapy-floor proxy is physical therapist aides in offices of chiropractors: 420 jobs at a median of $16.73 an hour, $34,790 a year.
The same BLS table counted 940 physical therapist assistant jobs in the industry.
Read each as a separate comparison point for therapy-floor work, not as a chiropractic technician wage.
Two cautions apply.
The figures describe employees in offices of chiropractors, not technicians in multispecialty or sports clinics.
And a practice's actual offer reflects its modality load, its location and how much rehab versus front-desk work the role folds in.
Employers weighing these figures for hiring a chiropractic technician can start from ChiroHires' hiring hub for chiropractic practices.
Career path for chiropractic technicians
The role sits at a junction with several exits.
Deeper into therapy and rehab is the first: a technician who runs the modality bay every day builds the hands-on background useful for rehab-focused roles and further clinical schooling.
Front of house is another direction: the same person who rooms patients can move to the front desk, then to patient-care or office-management work as they pick up scheduling, billing and staff supervision.
Massage is a defined step in Wisconsin's rules: a chiropractor may delegate massage or bodywork therapy to a chiropractic technician only if that person holds a Wisconsin massage therapist license (Chir 10.02(2)), so a Wisconsin technician adding soft-tissue work means earning that license.
Graduate school is a longer bridge.
Some physician assistant programs count patient-care hours from chiropractic support roles.
The University of Florida's PA program requires 1,000 hours of direct patient care and lists "Chiropractic Assistant (depending on time spent)" among qualifying work.
Pacific University's PA program lists "Chiropractor Assistant" among previously accepted experience, with 1,000 hours of patient care required at CASPA submission.
It typically does not accept administrative, billing or insurance work, so front-desk-only time is unlikely to count.
Each program sets its own rules, so a technician planning that route confirms hour requirements with the program, not with a job posting.
The constant across every path: the delegation and supervision rules of the state chiropractic board decide what the role can include, and each next rung brings its own credential requirement, set by the state or the school.
Find chiropractic technician jobs
ChiroHires lists chiropractic technician jobs from practices across the country, with filters for pay, benefits and location.
Postings arrive under several names (chiropractic therapy assistant, rehab technician, rehabilitation specialist, therapy technician), and ChiroHires files them all under this role, so search one tag rather than four.
Before you apply, get three answers: what therapies the room runs day to day, what the state board lets the practice delegate, and who supervises the therapy floor.
The third matters most in states with written delegation rules, because it sets what your certification or training is worth in that room.
A candid conversation about modality load also tells you whether the job is the therapy-track role this page describes or a front-desk job with therapy attached.
Career information, not legal or licensing advice; credential and delegation questions belong with the state chiropractic board, and certification terms with FCLB.

