Who may legally take x-rays in a chiropractic office
Two sets of rules answer the question, and they do not always come from the same agency. One covers delegation: what staff may do under a DC's license. The other covers the machine: who may operate it and how. Which agency holds which is a state-by-state matter.
Minnesota shows the split. X-ray equipment in chiropractic offices there, including the scope of practice for the people who operate it, is regulated by the Minnesota Department of Health under Minnesota Rules chapter 4732, not by the chiropractic board.
In the state rules our research reviewed, the person making the exposure falls into one of three groups: the DC; a staff member the state permits, whether by credential or by a required course; or a credentialed radiologic technologist. Our research found no national license for chiropractic-office x-ray work. The operator permissions it recorded come from states, and the states disagree on the title and the bar.
The examples run the range. Washington writes the setting into its credential: a licensed chiropractor there may employ only chiropractors or registered chiropractic X-ray technicians to operate x-ray equipment. Under Ohio's radiologic licensing rules, only the chiropractor is exempt: other staff who take x-rays need a general x-ray machine operator or radiographer license. Arizona's rule is the bar: a registered C.A. there may not take x-rays at all.
Two national bodies frame how common licensing is and what it is called. ARRT, which develops a limited-scope exam on behalf of state licensing agencies, says more than 75% of states have licensing laws covering radiologic technology (a count for the occupation generally, not for chiropractic offices specifically). ASRT notes states use different terms for permission to practice radiography (license, certificate, permit), so do not assume one title travels.
The state-by-state mapping, including training hours and exams, is on our career side in the guide to the chiropractic x-ray license. And if you are still sizing the role rather than the hire, start with what a chiropractic x-ray technician does, then come back to the staffing question.
Read the two agencies together before you write the job ad: what your board lets you delegate, and what your radiation-control program requires of the person pressing the exposure switch. Boards and radiation programs amend their rules. Confirm the current requirements with both before you hire.
Looking to hire? Post your chiropractic x-ray technician role on ChiroHires and reach people who already work in chiropractic clinics.
Post a Chiropractic X-Ray Technician Job →Hiring a permitted operator vs training a CA
Your state's rule decides the shape of the hire, not your preference. If it lets unlicensed staff train into the role, your applicant pool includes your own front desk. If it requires a registration or license before the first exposure, you are recruiting credentialed people, or budgeting real training time.
The train-a-CA path. Colorado is the worked example: unlicensed chiropractic staff there may operate x-ray equipment only after a board-approved 24-hour course, and the DC must keep written proof in the personnel file. The course's three modules cover radiological guidelines, operator and patient safety, and practical radiography. That last clause is an employer duty. The documentation is yours to keep.
The hire-a-permitted-operator path. Washington's registration for chiropractic X-ray technicians requires a commission-approved course of at least 72 classroom hours, 30 of them in person, plus written and practical exams passed at 70%. That is a substantial program, so a candidate who already holds the registration arrives trained.
Where the CA path stops. An assistant credential is not automatically an x-ray credential. An Oregon CA certificate does not cover x-rays: assistants there must be licensed by the Oregon Board of Medical Imaging to take them. Arizona goes further and bars registered C.A.s from taking x-rays at all. So in Oregon, moving a CA into x-ray work is not an internal checklist; it is a second license from a different regulator. In Arizona the C.A. registration itself never covers x-rays; the state's separate radiation rules for operators were outside our research, so ask the state's radiation-regulatory agency what an operator there must hold.
The national certificates our research checked do not bridge the gap. The CCCA, FCLB's certification for staff who assist with therapies, is not intended for x-ray or front-office staff (FCLB's own description). And where a state uses a limited-scope exam developed by ARRT, passing it does not make the candidate ARRT-registered; the state issues the permission.
One registry works this niche specifically. ACRRT, the American Chiropractic Registry of Radiologic Technologists, registers chiropractic paraprofessionals qualified in radiologic technology, and it administers state limited-permit x-ray exams used for licensing purposes. Its materials put state-required training between 8 and 120 hours and recommend at least 48, and ACRRT notes not all states recognize a limited permit for chiropractic staff.
Supervision can be part of a state's credential. Florida certifies Basic X-ray Machine Operators, who may perform general diagnostic radiography under the direct supervision and control of a licensed practitioner, in that practitioner's office. Our research did not confirm whether Florida requires chiropractic staff to hold that certificate. Whatever your state calls its version, build the workflow around who is present when the exposure is made.
Do not assume a dedicated hire is the default shape. BLS OEWS counted 240 radiologic technologists working in offices of chiropractors nationwide in May 2025 (wage-and-salary employees only), or 0.16% of the industry's employment. Plan for the shape your state's rule and your schedule actually need: one cross-trained permitted operator, a credentialed technologist on part-time hours, or the DC where the state allows.
Whichever path your state leaves open, the rest of the funnel is the same as any hire: the posting, the screening, the working interview, the offer. Our guide to hiring for your chiropractic practice covers it end to end.
Verifying the permit
Verify the credential before the candidate's first exposure: ideally before the offer, and no later than the first scheduled patient. A permit belongs to the person, not the practice. When an operator leaves, the credential goes with them, and your machine duties stay.
A short sequence covers it:
- Name the credential your state requires. States use license, certificate, permit and registration for the same permission, so start from your state's term. The posting, the file and the law should all say the same thing.
- Collect the document. Current credential, issuing agency, and any limits on scope. A limited-scope credential is limited by design (ARRT names its exam the Limited Scope of Practice in Radiography), so write the job's x-ray duties to match what the credential actually covers.
- Confirm it with the issuer. The agency varies: a chiropractic board, a state health department (Minnesota's model), or a medical imaging board (Oregon's). The issuer may also build an exam into the credential (NBCE administers state-specific exams that include Nevada's chiropractic-assistant radiology exam and Oregon's Chiropractic Assistant exam), so ask the issuer what the person must hold and keep current.
- Keep proof where your state requires it. Colorado puts the written proof of the 24-hour course in the personnel file. Where your state is silent, keep your own copy of the credential and any course records anyway.
How a credential's status is checked online varies by state, and our research did not compile each state's verification system, so start from the agency named on the credential itself. Borrowed titles mislead, too: Washington's registered chiropractic X-ray technician is that state's credential, not a national title, so do not copy another state's credential name into your posting.
Radiation safety duties
Hiring an operator does not move machine compliance off your desk. Three pieces stay with the practice, and none of them belongs to the new hire.
At installation, the federal piece: whoever installs certified diagnostic x-ray components files a report of assembly on Form FDA 2579 with the purchaser (you) and, where applicable, the state radiation-protection agency, within 15 days of completing assembly. Keep your copy with the equipment records.
In service, registration runs through the state. Our research holds no national registry. Texas is the worked example: anyone using a radiation machine in the healing arts, chiropractors included, must apply to the Department of State Health Services within 30 days after beginning use, under 25 TAC 289.226. Texas also requires an equipment performance evaluation within 30 days after initial installation, re-installation, or repair of a component that affects radiation output. Minnesota's equivalent sits with its Department of Health under the same chapter 4732, whose rule addresses inspection requirements.
Our research holds no national inspection schedule. The requirements above are Texas's, and Minnesota's chapter 4732 carries its own. The registration steps, shielding and inspection questions are covered in our guide to x-ray machine registration.
On the operator side, the duties are shorter but hard-edged: only people your state authorizes make exposures, the credential stays current, and training proof is kept where the state requires it. Registration windows and evaluation intervals get amended. Confirm the current requirements with your state radiation-control program and your chiropractic board before you install, hire or delegate.
Pay to offer
Two federal anchors set the frame, and they measure different populations, so do not average them.
The closer anchor is inside the industry: in offices of chiropractors (NAICS 621310), BLS OEWS counted 240 radiologic technologists and technicians (SOC 29-2034) with a median of $31.81 an hour, or $66,160 a year, in May 2025 (wage-and-salary employees only). The BLS tables our research used carry no chiropractic x-ray technician occupation, so this row is the closest available match, and its small count mirrors the hiring reality above.
The wider anchor is the same occupation across all industries nationwide: a median of $38.52 an hour ($80,110 a year), with the 10th percentile at $55,980 and the 90th at $118,660, also May 2025. That population is every industry, not chiropractic offices, so treat it as the occupation's national context, not a chiropractic-office rate.
Whatever title you post, hourly pay puts the role on the overtime clock. The FLSA salary threshold for the executive, administrative and professional exemptions in the CFR as of October 2026 is $684 a week ($35,568 a year), and staff paid less (or paid hourly) are generally owed overtime regardless of the title. State thresholds can sit higher. Our research did not compile them, so check your state labor agency's current figure.
Set the actual offer from your local market and the duties you stack on the role. An operator who also runs the front desk is a different job from one whose schedule is imaging only, and the posting should say which you are hiring.
This page is employer information, not legal, tax or employment-law advice. Operator, delegation and machine rules are state law; confirm the current requirements with your state chiropractic board and your state radiation-control program, and pay-and-hour questions with the U.S. Department of Labor's Wage and Hour Division or your state labor agency.

