CPT 97140 manual therapy with chiropractic adjustments (modifier 59 rules)
The biller's view of manual therapy billed alongside chiropractic CMT: what 97140 covers, the same-region bundle, when modifier 59 or XS applies, how timed units are counted, and what the visit note has to show.
status A in CMS's CY2026 fee schedule, 0.83 total non-facility RVUs
The code
CPT 97140 — manual therapy
bundled into the CMT under CMS's 2026 NCCI policy manual
Same spinal region as CMT
Not separately reportable
NCCI: 59 only when no more descriptive modifier applies
Different region
Modifier 59 or XS
therapeutic services furnished or ordered by a chiropractor are excluded (42 CFR 410.21(b)(2))
Medicare payment to a DC
CMT only
CPT 97140, the manual therapy code valued at 0.83 total non-facility RVUs in CMS's CY2026 fee schedule, falls under Medicare's NCCI bundle into chiropractic manipulative treatment (CMT) whenever it is performed in a spinal region the CMT charge already covers. Reported apart from CMT, it needs a different region and a modifier: 59, or the more descriptive XS. Medicare's chiropractic payment stops at the CMT; what happens to a therapy line elsewhere is each payer's own edit set.
What CPT 97140 covers
CPT 97140 is the manual therapy code in the 97xxx therapy series, a physical medicine code that rides alongside the chiropractic manipulative treatment (CMT) codes rather than being one of them.
The manipulation charge is its own family: Medicare Administrative Contractor (MAC) billing articles list exactly three covered spinal CMT codes: 98940 (1-2 spinal regions), 98941 (3-4 regions) and 98942 (5 regions).
97140's subject is manual therapy (the short descriptor CMS's fee schedule carries), and the full CPT descriptor is AMA-copyrighted, which is why billing references paraphrase it.
In CMS's CY2026 Physician Fee Schedule file, 97140 is an active code (status A) valued at 0.83 total non-facility RVUs.
At the CY2026 conversion factor of $33.4009 (the non-qualifying-APM factor), that works out to $27.72 nationally, unadjusted for geography.
That is a reference value for the provider types the Medicare therapy benefit covers, not a chiropractic payment amount.
The Medicare line is the one that shapes this code inside a chiropractic office: Part B does not pay for any diagnostic or therapeutic service furnished or ordered by a chiropractor (42 CFR 410.21(b)(2)).
Medicare's payment to a DC is limited to manual manipulation of the spine to correct a subluxation (the CMT codes above).
A 97140 charge from a chiropractic practice therefore lives with the practice's other payers, and each payer's edits are its own.
Our research did not verify commercial-payer rules on chiropractors billing therapy codes, so the payer's billing instructions and your contract settle what its edits allow.
Confirm there before the claim, not after the denial.
The wider claim cycle (enrollment, the AT modifier, ABNs, Medicare documentation) is in our guide to chiropractic billing and coding.
The separate-region rule with CMT
The bundling rule is CMS's, published in the NCCI policy manual: the 2026 edition states that physical medicine and rehabilitation services described by CPT codes 97112, 97124 and 97140 are not separately reportable when performed in a spinal region undergoing CMT.
Performed in a different region, the same manual says those codes may be reported with modifier 59 or XS, if the provider is eligible to bill them.
That eligibility clause is decisive on Medicare: Part B does not pay a chiropractor for therapeutic services, so a manual-therapy line on a Medicare patient's visit is not a Medicare payment line in any region.
What counts as a region comes from the MAC coverage instructions: CGS's local coverage determination names five spinal regions for CMT.
They are cervical (including the atlanto-occipital joint), thoracic (including the costovertebral and costotransverse joints), lumbar, pelvic (sacro-iliac joint) and sacral.
Applied to a 98941 visit, the rule reads mechanically: a 98941 charge says three or four spinal regions were manipulated, so manual therapy performed in one of those same regions falls under the rule and stays bundled.
Manual therapy outside the regions the CMT covered is the version the manual lets be reported apart, with modifier 59 or XS, for a provider eligible to bill the code.
The manual's rule names 97140 alongside 97112 and 97124, so the region test governs all three the same way.
Modifier 59 vs XS on 97140
Two modifiers fit the separate-region pathway, and NCCI ranks them.
Modifier 59 is the general unbundler, and the manual's instruction is to use it only when no more descriptive modifier applies; the X{EPSU} modifiers, effective January 1, 2015, may be used in its place whenever possible.
There are four X modifiers: XE for a separate encounter, XS for a separate organ or structure, XP for a separate practitioner, and XU for an unusual, non-overlapping service.
For manual therapy reported apart from CMT, the manual itself names 59 or XS, and XS (separate structure) is the more descriptive fit when the work was to a region outside the CMT's.
What does not free the line: a different diagnosis.
NCCI states that different diagnoses alone are not adequate criteria for modifiers 59, XE or XS.
The codes stay bundled unless the services happened at different anatomic sites or separate encounters.
The modifier is also only part of the claim's story: the payer's edit policy decides whether it honors the modifier, and the visit note has to show the region split the modifier asserts.
Modifier policy outside Medicare is payer-specific: confirm the payer's billing instructions, and have a certified coder review how the practice pairs these codes and modifiers.
Timed units: the 8-minute rule
97140 is a timed code: CMS's therapy examples count its minutes in 15-minute units, the same way they count minutes for 97110, 97112 and 97035.
Units follow Medicare's 8-minute rule: one 15-minute unit for 8 through 22 minutes, two units for 23 through 37, three for 38 through 52, and so on.
A service under 8 minutes is not billed on its own.
When several timed codes share a day, the total timed minutes set the total units across them.
CMS's worked example: 33 minutes of 97110 plus 7 minutes of 97140 is 40 timed minutes, which comes to 3 units: two units of 97110 and one unit of 97140.
The clock also cannot be shared: NCCI bars reporting more than one physical medicine or rehabilitation service for the same 15-minute period, with supervised modalities (CPT 97010 through 97028) the exception allowed to overlap other therapy time.
For the billing team, the takeaway is arithmetic that reconciles: minutes recorded per code, units derived from the rule, and no doubled 15-minute periods.
These mechanics are Medicare's Claims Processing Manual rules; other payers set their own unit rules, and theirs govern their claims.
Confirm theirs before the claim.
Documentation for 97140 alongside CMT
A manual-therapy line reported apart from CMT asserts two things the visit note has to show: the work was outside the regions the CMT covered, and it occupied its own timed minutes.
Concretely: the record identifies the spinal regions the CMT addressed, identifies where the manual therapy was performed, and carries minutes per code that reconcile to the units claimed under the 8-minute rule.
The diagnosis codes do no lifting here: NCCI's rule that different diagnoses alone do not justify 59, XE or XS means a second diagnosis on the therapy line is not a substitute for the region split.
The documentation stakes are measured, not rhetorical: CMS's 2024 improper-payment data classified 95.5 percent of chiropractic improper payments as insufficient documentation.
Those are chiropractic claims overall.
The lesson for this code is the same one the data gives the CMT line: the note carries what the claim asserts.
Who owns which rule: CMS publishes the NCCI policy manual and the claims rules behind the 8-minute rule; your MAC publishes its own billing articles; commercial payers set their own edit policies.
Check theirs.
Confirm how this code is handled with the payer's billing instructions, your MAC where Medicare is involved, and a certified coder, before the claim cycle makes the decision for you.
If this work lands on a hire rather than the owner's desk, that is your billing specialist: browse chiropractic billing specialist jobs to see what candidates see.
Employer information, not legal, tax, billing or coding advice. Confirm the treatment of 97140 on your own claims with your payers, your MAC and a certified coder.
Before a 97140 line goes out with CMT
- Region split documented: where the CMT was performed, where the manual therapy was performed; the NCCI rule bundles same-region work.
- Modifier chosen by NCCI's ranking: XS when it fits the structure split; 59 only when no more descriptive modifier applies.
- No modifier on diagnosis differences alone: different diagnosis codes are not adequate criteria for 59 or XS.
- Minutes per code in the note, reconciling to units under the 8-minute rule (8-22 minutes = 1 unit, 23-37 = 2, 38-52 = 3).
- No doubled 15-minute periods across timed codes; supervised modalities (97010-97028) are the overlap exception.
- Medicare expectation set: therapy codes are not payable to a chiropractor, so the therapy line is not a Medicare payment line.
- Payer edits confirmed in the payer's own billing instructions and your contract, reviewed with a certified coder.
Questions employers ask
Can a chiropractor bill 97140 with 98941?
It depends: region decides whether 97140 bundles into 98941, and the payer decides payment. Medicare's NCCI policy bundles 97140 into CMT (98941 is CMT for 3-4 spinal regions) whenever the manual therapy was performed in a region the CMT covered. In a different region, the NCCI manual says the code may be reported with modifier 59 or XS. Medicare still pays a chiropractor only for the CMT itself, since therapy services are excluded; other payers set their own edits.
Is CPT 97140 covered by Medicare?
No, Medicare does not cover CPT 97140 when a chiropractor furnishes or orders it. Medicare Part B pays a chiropractor only for manual manipulation of the spine to correct a subluxation (CPT 98940, 98941 or 98942), and the regulation excludes other diagnostic and therapeutic services (42 CFR 410.21(b)(2)), which is where the therapy codes, including 97140, sit. The code's CY2026 fee-schedule values are the reference amounts for the provider types the Medicare therapy benefit covers.
Modifier 59 or XS on 97140 with an adjustment?
For a different-region manual therapy, Medicare's NCCI manual names modifier 59 or XS as the modifiers that may accompany the separate line. NCCI's ranking: use 59 only when no more descriptive modifier applies, and prefer the X modifiers where possible. XS (separate organ or structure) is the descriptive fit for a region split. A different diagnosis on the line is not adequate grounds for either modifier.
How many units of 97140 are allowed per day?
Units follow minutes under Medicare's 8-minute rule: 8-22 minutes is one 15-minute unit, 23-37 is two, 38-52 is three. When timed codes share a day, the total timed minutes set the total units. CMS's example turns 33 minutes of 97110 plus 7 minutes of 97140 into three units. One 15-minute period cannot carry more than one physical medicine or rehabilitation service; supervised modalities are the exception.
Is 97140 the same code as a chiropractic adjustment?
No. The adjustment is the CMT charge: 98940 (1-2 spinal regions), 98941 (3-4) or 98942 (5), chosen by how many regions were manipulated. 97140 is a separate manual therapy code in the 97xxx therapy series, and Medicare's NCCI policy bundles it into the CMT whenever it is performed in a spinal region the CMT already covered.
More hiring resources
Hiring the team that owns your coding?
List your chiropractic billing specialist, front desk and office manager openings on a chiropractic-only job board.

