CPT 98941: billing spinal manipulation of 3-4 regions
What the CMT code for 3-4 spinal regions requires: the descriptor, the 98940 vs 98941 choice, the diagnosis support per region, pairing with 97140 and same-day E/M, and the CY2026 Medicare amounts.
Listed with 98940 (1-2) and 98942 (5) in Medicare MAC billing articles
CPT code 98941
CMT, 3-4 spinal regions
Cervical, thoracic, lumbar, pelvic (sacro-iliac), sacral — CGS LCD
Spinal regions for CMT
Five
98941 non-facility amount computed at the $33.4009 conversion factor; varies by locality
CY2026 Medicare, national unadjusted
about $38.41
Medicare claims for 98940-98942 without it are denied as maintenance
Medicare AT modifier on active treatment
Required
CPT code 98941 is the chiropractic manipulative treatment (CMT) code for spinal manipulation of three to four spinal regions. Medicare's MAC billing articles list it, with 98940 (1-2 regions) and 98942 (5 regions), as the covered chiropractic manipulation codes. This guide walks through what the descriptor requires, how a practice chooses between 98940 and 98941, how the record supports each region billed, how 97140 and same-day E/M interact with the code, and the CY2026 Medicare amounts for it.
The 98941 descriptor: chiropractic manipulation of 3-4 spinal regions
CPT 98941 is one member of the chiropractic manipulative treatment (CMT) family, the code set used for spinal manipulation delivered by a chiropractor.
What separates the family members is the number of spinal regions treated: 98940 covers manipulation of 1-2 regions, 98941 covers 3-4 regions, and 98942 covers 5 regions.
Medicare's MAC billing articles list those three codes as the covered chiropractic manipulation codes.
CGS's billing article, for one, lists 98940, 98941 and 98942 and no other manipulation codes.
The regions themselves are defined.
CGS's local coverage determination for chiropractic names five spinal regions for CMT: the cervical region (including the atlanto-occipital joint), the thoracic region (including the costovertebral and costotransverse joints), the lumbar region, the pelvic region (sacro-iliac joint) and the sacral region.
Those two lines make the descriptor arithmetic.
A visit whose documentation supports manipulation of three or four of the five regions is the 98941 case; one or two regions point to 98940, and all five to 98942.
One boundary completes the family: extraspinal manipulation is CPT 98943, and it sits outside this code set.
WPS, a Medicare administrative contractor, defines the extraspinal regions as the head, upper and lower extremities, rib cage and abdomen, and Medicare does not cover extraspinal chiropractic manipulation.
For where this code sits next to the rest of a claim's vocabulary, the wider set is covered in our guide to chiropractic billing and coding.
98940 vs 98941: the region count decides
What separates 98940, 98941 and 98942 is how many spinal regions were manipulated that day: 1-2, 3-4 or 5.
The regions being counted are the five regions CGS's LCD names: cervical, thoracic, lumbar, pelvic and sacral.
Worked through, that means a note documenting manipulation of the cervical, thoracic and lumbar regions describes three treated regions, inside 98941's range.
Treating a fourth region, such as the sacral, keeps the visit at 98941, while a fifth region moves it to 98942.
A one-region or two-region visit is the 98940 case.
Medicare also pays for no more than one chiropractic treatment per day, so the day's claim carries the one CMT code whose region range matches the treated and documented regions rather than a stack of the three.
When the region count in the code and the findings in the note disagree, the claim is exposed in review.
CMS's improper-payment data put 98941 among the top Part B codes for improper payments, and they classify 95.5% of chiropractic's improper payments as insufficient documentation.
The last section of this page takes up that data.
Diagnosis per region: what the record has to support
On a Medicare claim the diagnosis order is a MAC's rule.
WPS, a Medicare administrative contractor, states that the level of the subluxation must be the primary diagnosis on the claim, with the neuromusculoskeletal condition as the secondary diagnosis.
WPS's covered primary codes are the segmental and somatic dysfunction series, ICD-10-CM M99.00-M99.05, covering the head, cervical, thoracic, lumbar, sacral and pelvic regions.
Other MACs publish their own diagnosis lists, so the beneficiary's contractor's article governs.
The subluxation behind the code also has to be demonstrated.
Medicare accepts two ways to show it: an x-ray, or a physical exam meeting the PART test.
The exam route needs 2 of the 4 PART findings — pain and tenderness, asymmetry or misalignment, range-of-motion abnormality, and tissue or tone changes.
At least one of the two findings must be asymmetry or misalignment, or a range-of-motion abnormality.
Pain alone does not document a region.
CMS says a claim statement of “pain” is insufficient: the location of pain must be described and tied to whether the listed vertebra can produce pain in that area.
The initial visit sets the frame, and CMS's required elements are specific: history, description of the present illness, physical exam, a diagnosis with the subluxation as primary, a treatment plan, and the date of initial treatment.
Subsequent visits carry their own expectations: a history reviewing the chief complaint and changes since the last visit, a physical exam of the involved spinal area assessing change and treatment effectiveness, and documentation of the treatment given that day.
On a 98941 claim the treatment is manipulation across three or four regions, so those regions are what the note keeps identifying visit by visit.
Pairing 98941 with 97140 and same-day E/M
The pairing question that comes up around CMT is 97140, manual therapy, on the same day as manipulation.
CMS's National Correct Coding Initiative settles where it bundles: the 2026 NCCI policy manual states that 97112, 97124 and 97140 are not separately reportable when performed in the same spinal region as CMT.
In a different spinal region, the therapy code may be reported with modifier 59 or XS.
NCCI's own qualifier applies there: the codes are reportable in a different region only if the provider is eligible to bill them.
Two guardrails travel with the modifier.
NCCI says modifier 59 is used only when no more descriptive modifier applies, and its X{EPSU} set, available in 59's place since January 1, 2015, includes XS, defined as a separate organ or structure.
A second diagnosis does not unbundle the pair by itself.
NCCI states that different diagnoses are not adequate grounds for modifier 59, XE or XS unless the services were performed at different anatomic sites or separate encounters.
Medicare draws its own boundary around the whole pairing, and it is a hard one for a chiropractic office.
Payment under Part B is limited to manual manipulation of the spine to correct a subluxation (42 CFR 410.21(b)), and a chiropractor counts as a “physician” only for that treatment.
WPS lists physiotherapy and office visits among the services excluded from Medicare when performed by a chiropractor.
So under Medicare the therapy half of the pairing is not a chiropractor's payable service at all, and the NCCI region rules matter for providers in a multidisciplinary practice who are eligible to bill the therapy codes.
Our research did not verify whether commercial payers apply the same edits.
The therapy side has one more Medicare line for a multidisciplinary practice: chiropractors are not “physicians” for Medicare outpatient therapy, so they may not refer patients for therapy, establish therapy plans of care, or certify or recertify them.
Same-day E/M runs on a separate rule.
CMT codes carry a 000-day global period, so a same-day E/M is included in the CMT payment unless it is a significant, separately identifiable service reported with modifier 25.
The E/M and the CMT need not carry different diagnoses.
Medicare does not pay a chiropractor's office visits at all, so the modifier 25 route matters under commercial payers.
Each commercial payer's own policy sets when it pays an E/M beside CMT, which makes the payer contract the reference rather than a published national figure.
98941 reimbursement: the CY2026 Medicare amounts
The published anchor for 98941 reimbursement is Medicare's Physician Fee Schedule.
In the CY2026 file (the October 2026 RVU release, RVU26D), 98941 carries 1.15 total non-facility relative value units, against 0.80 for 98940 and 1.49 for 98942.
At the CY2026 conversion factor of $33.4009, the computed national unadjusted non-facility amounts are about $26.72 for 98940, about $38.41 for 98941 and about $49.77 for 98942.
Those figures are national and unadjusted (before geographic adjustment), and actual payment varies by Medicare locality, so a practice's own allowed amount will not match the national figure exactly.
Participation status moves the number: a non-participating provider's fee-schedule allowance is capped at 95% of the participating amount.
Commercial rates are contracts rather than a published schedule, and the figures verified for this page are Medicare's.
A “98941 reimbursement rate” quoted without a payer, a year and a locality is not an answerable number; the CY2026 Medicare amounts above (year, conversion factor and unadjusted basis all named) are the reference this page can stand behind.
The AT modifier gates the payment.
CMS Change Request 3449 made the AT modifier a requirement on chiropractic claims (98940, 98941 and 98942) for dates of service on or after October 1, 2004, when active, corrective treatment is performed.
Claims for those codes without the AT modifier are treated as maintenance therapy and denied.
The code also carries weight in CMS's payment-integrity data.
CMS's 2024 improper-payment data list 98941 among the top Part B codes for improper payments, with a projected $149.7 million in improper payments and a 32.9% improper payment rate for the code.
The report covers claims submitted July 1, 2022 through June 30, 2023.
The same dataset puts chiropractic's overall improper-payment rate at 33.6%, and 95.5% of chiropractic improper payments were classified as insufficient documentation.
For a practice, that skew is the useful part of the data: the region count, the per-region findings and the modifier are what the documentation has to hold together in review.
Employer information, not legal, tax, billing, coding or insurance advice. Confirm code selection, modifiers and payment amounts for your claims with your Medicare administrative contractor, your payer contracts and a certified coder.
What a 98941 claim needs on its side
- A region count of 3-4 supported by notes identifying the regions manipulated that day
- The subluxation demonstrated by x-ray, or by 2 of the 4 PART findings with at least one of asymmetry/misalignment or range-of-motion abnormality
- The subluxation level as the primary diagnosis and the neuromusculoskeletal condition as secondary (WPS's MAC guidance; other MACs publish their own lists)
- On Medicare claims, the AT modifier when the treatment is active, corrective care
- Therapy codes such as 97140 kept out of the same spinal region as CMT, or modifier 59/XS in a different region where the provider is eligible to bill the code
- A same-day E/M reported with modifier 25 only when it is significant and separately identifiable
Questions employers ask
What does CPT code 98941 cover?
CPT 98941 is the chiropractic manipulative treatment code for spinal manipulation of three to four spinal regions. Medicare's MAC billing articles list 98940 (1-2 regions), 98941 (3-4 regions) and 98942 (5 regions) as the covered chiropractic manipulation codes, and CGS's local coverage determination names the five spinal regions: cervical, thoracic, lumbar, pelvic (sacro-iliac) and sacral.
When is 98941 used instead of 98940?
When the day's documentation supports manipulation of three or four spinal regions rather than one or two. 98940 covers 1-2 regions, 98941 covers 3-4 and 98942 covers all five, so the region count in the record is what decides which code fits the visit. Medicare also pays for no more than one chiropractic treatment per day.
How much does Medicare pay for CPT 98941?
In CY2026, the computed national unadjusted non-facility amount is about $38.41, at the $33.4009 conversion factor and before geographic adjustment; actual payment varies by locality. A non-participating provider's fee-schedule allowance is capped at 95% of the participating amount, so participation status moves the number too.
Can 97140 be billed with 98941?
No, not in the same spinal region: NCCI's 2026 policy manual bundles 97140 into CMT when both are performed in the same region. In a different region the codes may be reported together with modifier 59 or XS, if the provider is eligible to bill the therapy code, and different diagnoses alone do not justify the modifier. Medicare does not pay a chiropractor for physiotherapy at all.
Why would a 98941 claim be denied?
Under Medicare, a claim for 98940, 98941 or 98942 without the AT modifier is treated as maintenance therapy and denied. The code also carries weight in CMS's payment-integrity data: 98941 is listed among the top Part B codes for improper payments, with a 32.9% improper payment rate, and 95.5% of chiropractic improper payments were classified as insufficient documentation.
More hiring resources
Hiring billing help for your practice?
List your opening where doctors of chiropractic, billing specialists and front desk staff look for their next role, with the practice model and the pay up front.

